Smart Lock Installation Guide

Introduction

Installing a smart lock is easier than you think. This guide walks you through the entire process.

Tools Needed

• Screwdriver (Phillips)
• Drill (sometimes)
• Tape measure
• Level
• Pencil
• New deadbolt (usually included)

Installation Steps

Step 1: Remove Old Lock

1. Unscrew the deadbolt from the inside
2. Remove the strike plate
3. Pull out the old deadbolt

Step 2: Check Compatibility

• Measure your door thickness (typically 1.375" - 2")
• Check backset (distance from edge to hole): 2-3/8" or 2-3/4"
• Verify your door material

Step 3: Install New Deadbolt

1. Insert the new deadbolt into the hole
2. Ensure it slides smoothly
3. Screw in place

Step 4: Install Exterior Part

1. Feed cable through the deadbolt
2. Align with interior part
3. Secure with screws

Step 5: Install Interior Part

1. Connect the cable
2. Align with deadbolt
3. Secure with screws
4. Install batteries

Step 6: Setup

1. Download the app
2. Create account
3. Add lock
4. Set up codes

Common Issues

Won't Connect to WiFi

• Check password
• Move closer to router
• Ensure 2.4GHz network

Deadbolt Won't Align

• Check alignment
• Adjust screws
• Use included washers

App Not Working

• Update app
• Check Bluetooth
• Re-add lock

Tips for Success

1. Read instructions first
2. Take photos of old lock
3. Test before closing door
4. Keep backup keys accessible
5. Check battery regularly

Verdict

Smart lock installation is a DIY-friendly project that takes 30-60 minutes. With basic tools and patience, anyone can do it!